How To Install Decking Panel Clips

Screw the black bar knob into the panel clip bracket so that the threaded stud is flush with the top of the plate. Lift the decking panel out of the dock frame. Slide the plate into the third plank on the aluminum decking panel so the L-leg of the clip is facing the outside of the panel. Replace the decking panel in the dock frame. Slide the decking panel clip toward the dock frame until the L-leg is snug against it. Tighten the bar knob underneath the panel to secure the clip in place. The PAN02 works for Truss Dock and Multi-Dock sections with aluminum panels. The PAN03 works for Post Dock sections with aluminum panels.  Panel clips are also available for dock sections with cedar or composite panels.