How to use the Dock Lever

Unlock the winch and ensure the line is correctly positioned over the top pulley. Slide the dock leveler over the leg post with the winch reel positioned over the decking. On Post Dock models with round posts, secure the dock leveler in place with the half-inch by one inch set screw. This keeps the dock leveler from rotating on the leg post. Attach the hook to the dock frame next to the leg post and remove any slack from the rope. Loosen the set screw in the dock pocket of the leg post. Rotate the winch handle to raise or lower the decking to your desired height. Re-tighten the set screw before releasing the winch handle and unhooking the dock leveler. Repeat these steps on all dock posts, alternating from side to side, until the entire dock is level and at your desired height.