Video Category: Lift
HOW TO USE THE LIFT-ASSIST TOOLBAR ON YOUR BOAT LIFT
The Lift-Assist Toolbar is helpful in breaking the lift posts free from the lake bottom and guiding the lift when pulling it from the water. Make sure your boat and...
HOW TO USE BOAT LIFT SCREW LEGS
Before adjusting anything, make sure the boat, or any weight, is off the lift. Remove the cap located on the side of the lift post. Apply a 3/4" socket...
HOW TO CHECK THE LIFT WINCH CABLE GUIDE
The cable guide is made for three thousand to seven thousand pound vertical lifts. It helps the cable wind up properly on the winch and prevent cable jumping. Make...
HOW TO REPLACE THE VERTICAL LIFT WINCH CABLE
This video will show you how to use ratchet straps to assist you in replacing the winch cable on a lift that is in the water. If your lift...
HOW TO INSTALL THE SOLAR CHARGE CONTROLLER AND PANEL
Porta-Dock offers a 10W and 20W solar panel. Feed the wiring of the solar panel down through the top of the solar panel arm tube and out the hole...
HOW TO INSTALL THE 103B WHEEL KIT
Make sure all weight is off the lift before trying to move it, or applying the weight of the lift to the wheels. Raise the bed of the lift...
PORTA-DOCK 1265 PWC LIFT MAINTENANCE
At the end of the season, inspect cables for any frays or broken wires. If excessive frays or breaks are noted, contact your dealer for a new cable. ...
HOW TO INSTALL A CANOPY FABRIC COVER
There is no designation for front and back. Your canopy cover should come with coil hooks, shock bungee cord, and s-hooks. Attach the s-hooks onto the thin metal strap...
HOW TO LEVEL A PORTA-DOCK LIFT
Do NOT attempt to adjust with the boat on the lift. Loosen the set screw and pull/push the leg post to the desired position. You will need to jack...
HOW TO INSTALL A MOTORIZED WINCH CABLE
Insert the key into the side of the motorized winch kit to activate the winch. As the motor spools the cable into the winch drum, prevent the cable from...